How to avoid a bridge strike.
Bridge strikes happen across Britain's road and rail network all the time, and almost every one comes down to the same thing: the driver didn't know, or forgot, how tall the vehicle was. Here's how to make sure it isn't you.
1. Know your height, every time
- Measure your running height with the load on. A trailer swap, a double-deck trailer or a raised fifth wheel can change it.
- Vehicles over 3 metres must show their travelling height in the cab where the driver can see it. Keep it up to date.
- Know it in both metres and feet and inches. UK bridge signs often show both, but older signs may show only one.
2. Plan the route for your vehicle
A car sat-nav doesn't know your height. Use a truck sat-nav with your real dimensions saved, or plan the route against a road atlas made for lorries. Pay extra attention to diversions and closures, which can send you onto roads you'd never normally use.
3. Read the signs and believe them
A red-bordered circular sign with a height means vehicles over that height are prohibited. A triangular warning sign shows the height under a bridge or arch. On arched bridges the headroom is lower at the edges than in the middle. Don't assume an old sign is generous, and never guess.
4. If in doubt, stop
If you're not sure you'll fit, stop before the bridge, put your hazards on and find another way. Turning back is cheaper than a strike.
5. If you do hit a bridge
- Stop and make the scene safe.
- If a railway bridge is involved, call the number on the bridge's identification plate or the railway emergency number straight away, so trains can be stopped.
- Call 999 if anyone is hurt or the road is blocked.
- Tell your operator. Don't drive on until the bridge has been checked.
How CARIBOU helps
CARIBOU plans routes around bridges you can't fit under, from your saved vehicle height, and shows a clearance card on approach with the bridge's height next to yours. See how it works for HGV drivers.